The Ultimate Guide to Storm Door Lock Replacement

Storm doors are not just good for decoration, they add to your safety during extreme weather conditions. Over time, the locks of these doors may become weak, thereby reducing the effectiveness of your security. When dealing with similar issues, one should be clear on how to replace a storm door lock.

However, if you experience problems during the replacement, a competent locksmith will be able to help you out.

What Is a Storm Door?

They are extra doors installed right outside your entry door. It protects against harsh weather, as well as providing ventilation and daylighting during good weather conditions. Storm doors add an extra layer of protection to your exterior doors. These are usually window glasses that allow passage of natural sunlight and provide better insulation, weather resistance, and security. Most storm doors are designed with replaceable or rolling-up glazing and screens.

Steps To Replacing Storm Door Locks

Evaluate Your Current Lock

You need to know your storm door lock before considering replacement. You should be keen to ascertain the exact type of lock, size, brands or models, etc. This is crucial in finding a suitable replacement. You could consider deadbolt, mortise, or lever-handle storm door locks.

Select the Necessary Tools and Supplies

You'll need the following supplies and tools to repair your storm door lock.

An optional lubricant
A drill
A pencil
Screws
A measuring tape
Screwdrivers
Strike plate and a replaceable lockset.

Select the Appropriate Replacement Lockset

This is when you decide what other lock to pick from for your door. Buy a storm door lockset in a hardware outlet or order one from an internet vendor. Ensure it is a high-quality product with clear instructions for installation.

Remove the Old Lockset

First, remove the screws and the old lockset by turning them anti-clockwise so that they can come off. Unscrew the lockset taking care not to lose any of the parts safely. Ensure you do not damage the door or frame while doing this.

Door Preparation

You might have to use a drill to make essential alterations if your new lockset comes with holes of different shapes and dimensions. Follow these strictly for a proper fit.

Install the New Lockset

The external part of the lockset which includes the key cylinder ought to be fastened to the door. Adjust all parts correctly and fasten with screws. Next, fix the internal parts. This can include thumb or finger turn locks depending on the instruction of the manufacturer.

Test the Lock

Ensure you test the installed lock to confirm it works without hindrance, following installation. Make sure the latch locks itself with the strike plate, while the locking mechanism of either key or a thumb turn is working properly.

Make Necessary Adjustments

Changing alignment and difficulty in locking should have been done during this testing period. Such changes could entail moving the strike plate, sprinkles of lubricants within the lock, and small correctional works on height alignment.

Final Inspection

Do a final check to verify if everything is good. Even though it might seem difficult, replacing a storm door lock is easier to accomplish when you have the right equipment.

Seek the advice of a locksmith if you are unsure of the process. For outstanding locksmith services and support, get in touch with the expert locksmiths at Diego's Locksmith. We can install or replace all kinds of locks.

Previous next